Instruction manual

GB-6
VOLUME control
Press the VOLUME ▲/▼ buttons to adjust the volume level.
Connecting headphones
Plug the headphones (not supplied) into the headphones jack at the back of the unit for private listening. The
speaker output will be shut off automatically.
DIMMER control
Press the DIMMER button to select the brightness of the display (high or low).
DISPLAY function
In radio mode, the clock is always displayed. You can press the SNOOZE/DISPLAY button to display the
frequency for 5 seconds.
RESET function
Press the RESET button with a sharp object to reset the unit.
Listening to the radio
1. When the unit is switched on, press the FUNCTION button to select FM or AM radio mode.
2. Press and hold down the TUNE/SKIP button for more than 1 second and the unit will automatically search
up / down for a radio station. For manual fine-tuning, you can press these buttons repeatedly to adjust the
frequency step by step.
FM Stereo
In FM mode, press the MO/ST button to select mono or stereo sound. The FM STEREO indicator will light up
when the unit receives a station with a strong signal and stereo sound.
Achieve optimum reception
In FM mode, extend and position the FM antenna to achieve optimum reception.
In AM mode, connect the loop antenna and orientate the unit to achieve optimum reception.
Preset radio stations
You can store up to 10 stations for FM and 10 stations for AM.
1. Use the TUNE/SKIP buttons to search for a desired station. Press the MEM/SET button and the station
frequency will flash.
2. Press the PRESET +/- button to select a desired station number.
3. Press the MEM/SET button again to confirm the setting.
4. Repeat steps 1 to 3 to store any other desired stations.
RADIO OPERATION
Listening to a preset station
When listening to the radio, press the PRESET +/- buttons to select a preset radio station.