Specifications

ManualsBrandsSCOTT ManualsRadio receiversHotel

GB - 9

UX IN FUNCTIONUX IN FUNCTION

UX IN FUNCTION

This unit has a AUX IN jack for connecting an external audio device, such as an MP3 player or portable CD player

with an AUX IN cable (not supplied).

1. Plug the AUX IN cable (not supplied) into the AUX IN jack. Refer to the “CONNECTIONS” section.

2. In the main menu, select “Aux IN”.

3. Operate your external audio device as usual to select and play the music.

4. Adjust the volume controls on both your external audio device and this

unit to the desired volume level.

Note:

In AUX IN mode, this unit cannot display any music information (e.g. track no.)

for your external audio device.

MAINTENANCEMAINTENANCE

MAINTENANCE

Care and maintenance

To clean the casing, unplug the unit and wipe off dust and stains with a soft, damp cloth. Do not use benzene, thinner

or similar chemicals.

If at any time in the future you should need to dispose of this product, please note that waste electrical products

should not be disposed of with household waste. Find out where your nearest recycling centre is. Check with your

local authority or retailer for more details. (Waste Electrical and Electronic Equipment Directive)

Problems Recommendations

FM Radio

1. Noise or distorted

sound

1.1 Extend and position the FM antenna wire to achieve the best

reception.

Internet Radio

2. No Internet

connection

2.1 Make sure that you have configured your home network

correctly by connecting to the same network from a PC.

2.2 Check that the Ethernet cable is properly plugged in.

2.3 Ensure that a DHCP server is available or that you have

configured a static IP address.

2.4 If the unit is connected directly to a modem, switch the modem

off and back on again to connect to the Internet.

3. The Internet

connection is

successful but cannot

play a particular

station

3.1 The station does not broadcast 24 hours per day.

3.2 The station has reached the maximum allowed number of on-

line listeners.

3.3 The station is no longer broadcasting.

3.4 The link on the unit is out of date.

3.5 The Internet connection between you and the server (often

located in a different country) is too slow.

General

4. The unit or display has

a fault

4.1 Press the ON/STANDBY (

) button to go to Standby mode and

press it again to turn the unit back on.

4.2 Reset by unplugging the AC mains adapter for few seconds and

plugging it back in.

5. No sound 5.1 Adjust the volume.

5.2 Disconnect the headphones.

TROUBLETROUBLE

TROUBLE

SHOOTING GUIDESHOOTING GUIDE

SHOOTING GUIDE