Operation Manual

ENGLISHENGLISH
In order to seal the housing ports on the frame you
should use the plugs attached to the bike.
Please secure the clamps
with a cable zipper as shown:
The cable guide can be ordered via the SCOTT distribution with parts number:
229723 BB Cable Guide Genius (f. Carbon Frame)
ALLOY FRONT FRAMES
Please fix the derailleur cable housings,
the brake hose and the remote
seatpost cable housing (if applicable)
on the frame on the cable mounts with
the mount clips by following the routing
info as shown below:
Please secure the clamps with
maximum 4Nm/35in-lbs as shown:
•
IMPORTANT!
Please make sure to respect the 40mm distance between the cables and the BB (bottom
bracket) housing to avoid “ghost-shifting” and/or damages on the shift cables and
brake hose.
229724 Cable Clamping Set Genius alloy 2013 one size
•
ADJUSTMENT OF SEATPOST-HEIGHT
•
IMPORTANT!
The seatpost has to be inserted into the seattube at a minimum of 100mm.
Never use another seatpost diameter than 31.6mm or try to use a shim/reducer between
seatpost and frame.
27 |
BIKE USER MANUAL | GENIUS LTGENIUS LT | BIKE USER MANUAL
| 26