Operation Manual

ENGLISHENGLISH
•
CHAINGUIDE
The Carbon as well as the alloy frames of Genius LT can be fitted with ISCG chainguide
systems.
A set of all spare parts for this action can be ordered via the SCOTT distribution with:
229730 ISCG adaptor Genius 2013
Details for the assembly on the carbon frames of Genius LT:
The adaptor must be used in order to assemble the chainblocker on the ISCG05
chainguide system.
Please note that you need to assemble the chainblocker exactly the way as shown and use
all parts of the set.
Please also respect the different assembly positions for SRAM and Shimano front derailleurs
For 2x10 drivetrains you need to use 2x2.5mm washers, for 3x10 drive trains 1x2.5mm
washers between adaptor/frame and the chainblocker as shown.
Details for the assembly on the alloy frames of Genius LT:
You can assemble the chainblocker directly on the integrated ISCG05 mount on the BB shell.
Please respect the different assembly positions for SRAM and Shimano front derailleurs.
In addition to the chainblocker assembled on the Genius LT you also find a chainguide
mounting port below the chainstay.
Both frame options, carbon and alloy, have the same feature.
You can use 2 different versions:
1. single chainring
2. double chainring
In case the chainguide is once worn out by the chain running through the guide you can
order a service kit with article numbers:
235291 Chainguide Genius LT 2014 single Speed
235292 Chainguide Genius LT 2014 double Speed
To assemble the parts please follow following points:
1. insert the chain between the 2 parts of
the cage
2. insert the steel tube through the plastic
chain guide hole
3. tighten the bolt with maximum
4Nm/35in-lbs
23 |
BIKE USER MANUAL | GENIUS LTGENIUS LT | BIKE USER MANUAL
| 22