Operation Manual

ENGLISHENGLISH
•
ADJUSTABLE BB HEIGHT
On Genius LT bikes equipped with the FOX Nude or the FOX CTD shock you can adjust the
BB height above ground in 2 positions by flipping a geometry chip located on the linkage
bar shock mount.
Only use the appropriate adaptor.
•
FRONT DERAILLEUR (FD) MOUNTING DETAILS
On all Genius LT frames you
will find a Shimano E-type
front derailleur but fixed
directly on the swingarm
without the plate that is fixed
normally between the bottom
bracket bearing cup and the
bottom bracket housing of
the front triangle or a SRAM
Direct Mount Type S3 FD.
Please note that you always
need to use the adapter plate
attached to the bike or frame
set between chainstay and
front derailleur.
This adapter can be ordered at the SCOTT distribution with parts number:
235277 FD mount plate Set Genius LT 700 2014
Please note that the adapter is not interchangeable!
1. low BB for lower center of gravity over ground
2. high BB for bigger clearance between pedals/crankset and obstacles on the ground
•
IMPORTANT!
It is not possible to use this geometry chip with other shock models than the FOX Nude or
FOX CTD.
The shock might collide with parts of the frame or linkage bar.
21 |
BIKE USER MANUAL | GENIUS LTGENIUS LT | BIKE USER MANUAL
| 20