Operation Manual

10
GENIUS LT | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | G ENIUS LT
11
L5
L1
L4
L2
L3
S6
S7
S4
S3S8
S9
S2 S1
S5S7S4
ENGLISH ENGLISH
FOX NUDE SHOCK AND TWINLOC REMOTE CONTROL
LEVER
In the drawing of the shock and remote lever, shown below, you will see the parts
indicated with numbers which will be used in the manual for the adjustment and setup.
Parts List
S1 Front eyelet/ Shock Bolt
S2 Rear eyelet/ Shock Bolt
S3 Shock Housing
S4 Rebound-Adjuster Knob
S5 Positive Chamber Valve
S6 Remote Control Wheel
S7 Cable Fixing Screw
(hidden behind remote wheel)
S8 Shock Piston
S9 SAG Indicator (o-ring on piston)
L1 Remote Lever
L2 Release button
L3 Remote Control Cables
L4 Cable Tension Screw Fork Remote
L5 Cable Tension Screw Shock Remote
1. loosen the cable fixing screw (S7) by
turning it counter clockwise with a 2mm
allen key.
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF
FOX NUDE SHOCK
To ensure perfect function of the FOX Nude shock it is very important to follow the
steps shown below exactly.
On Genius LT Carbon frames you will find an internal cable routing.
Push the inner cable first through the remote
lever in the upper cable routing of the lever and
then through the cable housing as shown below
inside the toptube.
On Genius LT alloy frames a
regular outside cable routing,
the outer cable housing is fixed
on cable mount ports with cable
zippers.
2. insert a new cable via lever hole and
cable housing and push it into the
shock as shown around the remote
wheel (S6).