Operation Manual

20
GENIUS LT | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 | G ENIUS LT
21
ENGLISH ENGLISH
IMPORTANT!
It is not possible to use this geometry chip with other shock models than the FOX
Nude or FOX CTD.
The shock might collide with parts of the frame or linkage bar.
FRONT DERAILLEUR (FD) MOUNTING DETAILS
On all Genius LT frames you will find a Shimano E-type front derailleur but fixed
directly on the swingarm without the plate that is fixed normally between the bottom
bracket bearing cup and the bottom bracket housing of the front triangle or a SRAM
Direct Mount Type S3 FD.
Please note that you always need to use the adapter plate attached to the bike or
frame set between chainstay and front derailleur.
This adapter can be ordered at the SCOTT distribution with parts number:
235277 FD mount plate Set Genius LT 700 2014
Please note that the adapters are not interchangeable!
ADJUSTABLE BB HEIGHT
On Genius LT bikes equipped with the FOX Nude or the FOX CTD shock you can
adjust the BB height above ground in 2 positions by flipping a geometry chip located
on the linkage bar shock mount.
Only use the appropriate
adaptor.
1. low BB for lower center of gravity over ground
2. high BB for bigger clearance between pedals/crankset and obstacles on
the ground
GENIUS LT
LOW POSITION HIGH POSITION
HEAD ANGLE 66.3° 66.8°
BB HEIGHT 346mm 352mm