www.scott-sports.com All rights reserved © 2014 SCOTT Sports SA SCOTT Sports SA | 17 Route du Crochet | 1762 Givisiez | Switzerland Distribution: SSG (Europe) Distribution Center SA P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | Belgium V4.
ENGLISH ENGLISH CONTENT Genius LT Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 www.scott-sports.com Geometry/Technical Data Genius LT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05 TC Shock Technology/Twinloc Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GEOMETRY/TECHNICAL DATA GENIUS LT The new Genius LT is the result of 2 years of research and development for one of the lightest all-mountain bike frame set available on the market, hitting the scale at below 2550grams (5.60lbs) including the frame, FOX Nude/FOX Float CTD shock and the unique TWINLOC XL remote control. SCOTT’s focus was not only on lightweight but also on a durable and stiff frame with an innovative suspension technology in combination with an optimized kinematics of the rear swingarm.
You have 3 positions of the TWINLOC remote lever. The heart of the TC-System is the FOX Nude Shock made by FOX, offering three functions which make this system possible. 1. LOCK OUT MODE: the shock is locked; climbing on asphalt roads is now possible without any power loss. Simultaneous a blow-off-system prevents the shock being damaged in case the rider did not open the system while crossing obstacles.
-- FOX Nude with different rolls for FOX CTD fork and RockShox DNA 3 fork (SCOTT Article number: 230097) ASSEMBLY OF THE REMOTE CABLE ENGLISH ENGLISH SCOTT offers 2 different TWINLOC levers with following fork/rear shock combinations: IMPORTANT! -- FOX CTD with different rolls for FOX CTD fork and RockShox DNA 3 fork (SCOTT Article number: 230098) Please make sure the lockout of SRAM/RockShox or FOX fork is activated after transport correctly.
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF FOX NUDE SHOCK In the drawing of the shock and remote lever, shown below, you will see the parts indicated with numbers which will be used in the manual for the adjustment and setup. To ensure perfect function of the FOX Nude shock it is very important to follow the steps shown below exactly. ENGLISH ENGLISH FOX NUDE SHOCK AND TWINLOC REMOTE CONTROL LEVER On Genius LT Carbon frames you will find an internal cable routing.
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF FOX CTD SHOCK ENGLISH ENGLISH 3. tighten the cable and fix the cablefixing screw (S7) by turning it clockwise with a 2mm allen key and a max. tightening torque of 1.6Nm. The assembly of the remote cable and the setup of the FOX CTD rear shock is very similar to the abovementioned assembly and setup of the FOX Nude. For more details on the FOX CTD please follow the details shown in the manuals of FOX attached to this bike 4.
SAG The Set-Up of the FOX Nude or FOX CTD Shock can be easy done within a few minutes. The SAG should be 18mm on the shock piston. IMPORTANT! For all adjustments of the air spring the remote lever has to be in position “all travel” To adjust the air pressure of the air chamber of the FOX Nude or FOX CTD Shock please refer to the following instruction: 1. Remove the valve cap of the valve (s5) located on the shock housing (S3). 2. Mount the shock pump with its adaptor on the valve 3.
IMPORTANT! After a dismantlement of the rear shock, both fixing bolts should be tightened with a tightening torque of 10Nm/88in-lbs. “Rebound” describes the speed the shock comes back to its original length after absorbing an obstacle. ENGLISH ENGLISH SET-UP OF REBOUND FOX NUDE OR FOX CTD SHOCK If this is not done correctly the rear shock can be damaged. By using the rebound adjuster knob (S4) you can adjust the rebound step by step.
BOTTOM BRACKET (BB) ON GENIUS LT Genius LT features a tapered headset and fork steerer system to match with semi-integrated headsets of the “50-61”mm range with ID of Headtube of 44.0mm on top and 54.9mm on the lower end. All frames of Genius LT (carbon and alloy) have a BB shell for BB92PF standard. ENGLISH ENGLISH HEADSET OPTIONS The BB housing has actually a width of 89.5mm. IMPORTANT! Please note that you need a 2.
IMPORTANT! It is not possible to use this geometry chip with other shock models than the FOX Nude or FOX CTD. On Genius LT bikes equipped with the FOX Nude or the FOX CTD shock you can adjust the BB height above ground in 2 positions by flipping a geometry chip located on the linkage bar shock mount. Only use the appropriate adaptor. ENGLISH ENGLISH ADJUSTABLE BB HEIGHT The shock might collide with parts of the frame or linkage bar.
You can assemble the chainblocker directly on the integrated ISCG05 mount on the BB shell. Please respect the different assembly positions for SRAM and Shimano front derailleurs. The Carbon as well as the alloy frames of Genius LT can be fitted with ISCG chainguide systems. In addition to the chainblocker assembled on the Genius LT you also find a chainguide mounting port below the chainstay.
Headtube section: BB section: ENGLISH ENGLISH GENIUS LT CABLE ROUTING The direct and straight cable system on all our full suspension models offers perfect shifting performance combined with lightweight and high resistance against water and dirt. CARBON FRONT FRAMES The carbon frames of Genius LT have an internal shifting cable routing with cable stops on the front end of the downtube as shown in the diagram.
Please secure the clamps with a cable zipper as shown: Please make sure to respect the 40mm distance between the cables and the BB (bottom bracket) housing to avoid “ghost-shifting” and/or damages on the shift cables and brake hose. 229724 Cable Clamping Set Genius alloy 2013 one size ENGLISH ENGLISH In order to seal the housing ports on the frame you should use the plugs attached to the bike.
For 185mm rotor diameter you will need 2 red anodized spacers that can be ordered via the SCOTT distribution with: 219568 On Genius LT bikes of model year 2013 you can replace the rear derailleur hanger. Depending on the different models you’ll find following options: Brake Mount Adapt.Spacers 4mm f/185mm For the 200mm rotors please use for: 1.
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WARRANTY ENGLISH ENGLISH WARRANTY SCOTT bikes are made using the most innovative production and quality methods. They are equipped with best components of well known parts suppliers. Year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
