Operation Manual

28 scott-sports.com 29
GENIUS LT
BIKE OWNER’S MANUAL
235291 Chainguide Genius LT 2014 single Speed
235292 Chainguide Genius LT 2014 double Speed
ENGLISH
Please note that you need to assemble the chainblocker exactly the way as
shown below and use all parts of the set.
Please also respect the different assembly positions for SRAM and Shimano front
derailleurs
For 2x10 drivetrains you need to use 2x2.5mm washers, for 3x10 drive trains
1x2.5mm washers between adaptor/frame and the chainblocker as shown above.
Details for the assembly on the alloy frames of Genius LT:
You can assemble the chainblocker directly on the integrated ISCG05 mount
on the BB shell.
Please respect the different assembly positions for SRAM and Shimano front
derailleurs.
In addition to the chainblocker assembled on the Genius LT you also find a
chainguide mounting port below the chainstay.
Both frame options, carbon and alloy, have the same feature.
You can use 2 different versions:
1. single chainring
2. double chainring
In case the chainguide is once worn out by the chain running through the
guide you can order a service kit with article numbers:
To assemble the parts please follow following points:
1. insert the chain between the 2 parts
of the cage
2. insert the steel tube through the
plastic chain guide hole
3. tighten the bolt with maximum
4Nm/35in-lbs