Operation Manual

34 scott-sports.com 35
GENIUS
BIKE OWNER’S MANUAL
229724 Cable Clamping Set Genius alloy 2013 one size
ENGLISH
Please tighten the mount bolt with a max. of 4Nm.
Please make sure to respect the 40mm distance between the cables and the
BB (bottom bracket) housing to avoid “ghost-shifting” and/or damages on
the shift cables and brake hose.
For the rear brake please assemble the cable as shown in the following drawings:
ADJUSTMENT OF SEATPOST-HEIGHT
IMPORTANT:
The seatpost has to be inserted into the seattube at a minimum of 100mm.
Never use another seatpost diameter than 31.6mm or try to use a shim/
reducer between seatpost and frame.
In addition to the derailleur cables and the brake hose you also will see a
possibility for an integrated cable routing of the seatpost remote on the
carbon version of Genius.
In order to seal the housing ports on the frame you should use the plugs
attached to the bike.
Alloy front frames:
Please fix the derailleur cable housings, the brake hose and the remote
seatpost cable housing (if applicable) on the frame on the cable mounts with
the mount clips by following the routing info as shown below: