Operation Manual

30 scott-sports.com 31
GENIUS
BIKE OWNER’S MANUAL
ENGLISH
GENIUS CABLE ROUTING
The direct and straight cable system on all our full suspension models offers
perfect shifting performance combined with lightweight and high resistance
against water and dirt.
Carbon Front frames:
The carbon frames of Genius have an internal shifting cable routing with
cable stops on the front end of the downtube as shown in the drawing below.
Please note that the inner cables
need to cross each other 1 time on
the inside of the downtube before
you pull them out through the cable
slot on the lower downside of the
downtube.
Push the cables through the cable
guide as shown below and fix the
cable guide on the downtube with
a 3mm allen key and a tightening
torque of max. 4Nm/35in/lbf.
Please note that you need to assemble the chainblocker exactly the way as
shown below and use all parts of the set.
Please also respect the different assembly positions for SRAM and Shimano front
derailleurs
For 2x10 drivetrains you need to use 2x2.5mm washers, for 3x10 drive trains
1x2.5mm washers between adaptor/frame and the chainblocker as shown above.
Details for the assembly on the alloy frames of Genius:
You can assemble the chainblocker directly on the integrated ISCG05 mount
on the BB shell.
Please respect the different assembly positions for SRAM and Shimano front
derailleurs.