Operation Manual

Removing the Unit
Detach the front panel before removing the unit. For more details, refer to
“DETACHING THE FRONT PANEL”.
1.Take out the Outer Trim Frame after detaching the front panel.
2. Insert the keys supplied into the unit at both sides of the unit (shown as illustrated) until they click.
Pulling the keys makes it possible to remove the unit from the dashboard.
Cleaning the Connector
If the connector is dirty, it may result in the unit not working properly. To avoid such problem happening, please detach the front
panel, and clean the connector with an alcohol swab. Gently clean the connector and avoid damaging it.
The main unit
The backside of the front panel
Notes
• For security reasons, always shut down the engine and remove the key from the ignition before cleaning.
• Never let your finger or any metal device touch the connector directly.
GB-8