Operation Manual

14. Selecting an audio mode
In VCD mode, press the AUDIO button (6) repeatedly to select an audio mode in the following order:
Note:
* This function can only be carried out with remote control.
15. PBC Selector
In VCD mode, press the TITLE button (3). PBC playback starts and the menu of the entire disc appears on the LCD. Then you can select
the desired track by using the number button (23). When a track is playing, you can press the MENU button (4) to return to the menu, if
you want to stop the track and select another. To cancel the PBC function, press the TITLE button (3) again.
Note:
* PBC playing confirms to version 2.0 or above disc only.
* This function can only be carried out with remote control.
16. Programmed Playback
In VCD/CD mode, press the PROG button (13) and the program menu will be displayed. Press the number buttons to select the track
number. Move the cursor to EXIT and press ENTER to exit the programmed playback. Move the cursor to  and press ENTER to go to
the previous page; move the cursor to  and press ENTER to go to the next page. During this process, press  (18) or press PROG (13)
to cancel the programmed playback.
Note:
* This function can only be carried out with remote control.
* To input the single digit track number, “01”, “02”,….”09” must be entered, instead of “1”, “2”, …..”9”.
GB-27