Operation Manual

1. Playing a disc/USB device
Play disc: Press PWR button to turn on the unit and then press RELEASE button to release the front panel. Then, insert a disc
(with label side up) into the disc loading slot and close the front panel. It will automatically switch to the DVD mode. If USB is
inserted, press SOURCE button to select the DVD mode.
If it contains folders, at STOP mode, use the  or  buttons (21) to select the required folder. Then confirm using the ENTER button.
Then select the desired file using the  or  buttons.
Note:
* USB mode is at priority: when closing the front panel, the unit will switch to the USB mode if the USB device is inserted.
* You can eject the disc by using
RELEASE button to open the front panel and then pressing the button on the main unit.
2. Quick track selection
Play MP3/MPEG-4 files: At STOP mode, press the  or button on the remote control to go to the next or previous track and then
press ENTER to play;
During VCD/CD/MP3/MPEG-4 playback, press the or button on the remote control to play the previous or next track.
Note:
* The and button on the main unit performs the same function.
3. Repeat Playing
During playback , press RPT button(15) on the remote control to replay the current track. Press it again to cancel this function.
Note:
* Press AMS button(6) on the main unit can be used to operate repeat play.
GB-23
10.VCD/CD/MP3/MPEG-4/USB
Play USB device: firstly open the rubber cover, then insert USB device with supplied USB cable if necessary in USB port, it will
automatically start playback.