Operation Manual

10. Alternative Frequencies
Briefly press the AF button (26) on the remote control to switch the AF function on/off. With this function, if the RDS signal is weak
or even no signal, the unit will search for the best alternative frequency available for the current station. And AS or AF: SCH displays
on the LCD at the same time. When the strong RDS signal is received, the AF or AF:ON or AF:OFF displays.
Note:
* The AF on the unit (11) performs the same operation.
11. Traffic Alarm
Briefly press TA button (25) on the remote control to activate the traffic alarm function, LCD displays “TA”, and revealing the TA
status by TP by the following three conditions:
When TP didn’t display, there are no TA and EON program; when TP display, TA program is playing now. if a disc is being played, it will
switch to TA program at once, TRAFFIC and PS information appears on LCD, when it is off, the unit will return to the initial status.
Note:
* Briefly pressing TA button (15) on the main unit performs the same function.
12. Program Type
Briefly press the ANGLE button (7) to activate the PTY function.
When this function is on, press the  and  buttons to select your desired item, after that, press and hold
ANGLE to start PTY searching or press ANGLE then it will start automatically after 3 seconds.
Note:
* This function can only be carried out with the remote control .
* Briefly press OSD button (8) on the remote control to show the setup information before setup.
* The ANGLE button for this function is activated only in FM RDS mode.
GB-20