Operation Manual

2. Manual/Automatic Tuning
Manual Tuning: Briefly press the  or  button (20) on the remote control continuously to increase or decrease the frequency and
search for a station. Automatic Tuning: Press and hold down the  or  button (20) for more than 3 seconds to automatically search
for lower or higher frequencies.
Note:
* The
buttons on the main unit (12) perform the same function.
3. DX/LOC Selector
In radio mode, press the LOC button (5) on the remote control to select the reception of local stations.“LO” appears on the display
and only local stations are available. Press this button again to switch off this function. ”DX” appears and both distant and local
stations can be received.
Note:
* The function can only be carried out with the remote control.
* The function is invalid in AM tuning.
* The default mode is DX mode.
4. Selecting the Stored Station
In radio mode, press the
 or  button (27) to select the next or previous stored station.
Note:
* The function can only be carried out with the remote control.
5. MONO/STEREO Selector
In radio FM mode, press the ST button (6) on the remote control to select MONO or STEREO mode. When mono mode is selected,
the letters “MO” appear. It is switched to stereo mode when “MO” disappears.
Note:
* This function can only be carried out with the remote control.
GB-18