Operation Manual

1. Reset the Unit
When operating the unit for the first time or after replacing the car battery, you must reset it.
Press the RESET button (10) on the main unit with a pointed object, (such as a ballpoint pen) to reset it.
Note:
* When errors occur on the display, you can press RESET button to resolve the problem, The clock setting and any memorized functions will be erased.
* Only the RESET button on the main unit can be used to reset the unit.
2. Turning the Unit On/Standby
Press the PWR button (1) on the remote control to turn on the unit at last mode. When the unit is on and a disc or USB device is inserted,
it will automatically switch to this mode and start playback. Press it again to go to standby mode.
Note:
* Pressing the PWR button on the main unit will perform the same function.
3. Volume Control
Press the VOL+ button (14) on the remote control to increase the sound level and press the VOL- button (14) to lower the sound level.
Note:
* The volume can also be adjusted by rotating the VOL+/- button (3) on the main unit.
GB-14
8. Common Operations