User manual

GB - 14
ADVAnCeD PLAyBACK fUnCtIons AUX (AV In) fUnCtIon
GOTO
You can use the search feature to select a title/chapter/track number or
gotoaspecicpointinatitle,chapterortrack.First,pressthe GOTO
button on the remote control to display the search menu. Secondly,
press the arrow buttons / to highlight the title/chapter/ track (for
CD/VCD) number or the time option. Thirdly, use the number buttons
to enter the title/chapter/track you want to play or the elapsed time you
want to go to in that title, chapter or track. Finally, press the OK button to
start playback.
Repeat a specic segment
1. During normal playback, press the REPT A-B button once and
“REPEAT A-" will appear on the screen. This indicates that the
segment to be repeated will start at this point.
2. Press REPT A-B again and “REPEAT A-B” will be displayed on the
screen. This indicates that the segment to be repeated will end at this
point.
3. The unit will play from set point A to set point B until you turn off the
repeat function.
4. Press REPT A-B again to cancel the repeat function.
PROGRAM
Press the PROG button to display the program menu. Move the cursor
to select the title/chapter number (DVD) or track number (for CD/VCD).
If you want to clear all entries, move the cursor to “CLEAR” and press
the OK button. To start the programmed playback, move the cursor to
“PLAY” and press OK. During this process, press or press PROG to
cancel the programmed playback.
1. Connect an external A/V device to the AUDIO IN-R, AUDIO IN-L and
VIDEO IN jacks (connected from extension cables) on the unit.
2. In the source menu, touch the “AUX” button to enter the AUX (AV IN)
mode.
Note: You can also use the SRC button on the remote control to
select the source.
3. OperatetheexternalA/Vdevicetoselectandplayale.
4. Adjust the volume controls on both the external A/V device and this
unit to the desired volume level.