Instruction manual

GB-3
OPERATING INSTRUCTIONS
Connecting the power supply
Insert the AC power cord into the AC mains outlet with a 230V AC ~ 50Hz power source. The LED
display will ash.
Clock setting
1. Press and hold down the TIME and FAST buttons to set the clock quickly.
2. Press and hold down the TIME button and press the SLOW button repeatedly to set the clock
precisely, minute by minute.
Alarm operation
The unit allows you to wake up to the buzzer or radio.
Set the alarm time 1
1. Adjust the ON/OFF/AUTO switch to AUTO. The alarm
indicator(s) will light up.
2. Adjust the ALARM 1/1+2/2 switch to 1. The AL1 LED
indicator will light up.
3. Press and hold down the ALARM and FAST buttons to set the alarm time 1 quickly.
4. Press and hold down the ALARM button and press the SLOW button repeatedly to set the alarm
time 1 precisely.
Set the alarm time 2
Follow the same steps in the section “Set the alarm time 1”, but
adjust the ALARM 1/1+2/2 switch to the 2 position. The AL2 LED
indicator will light up.
Wake to Buzzer
1. Turn the VOLUME/OFF BUZZER knob to “BUZZ” until a click sound is heard.
2. Adjust the ON/OFF/AUTO switch to AUTO. The alarm indicator(s) will light up.
3. Adjust the ALARM 1/1+2/2 switch to select alarm 1, 2 or both (1+2). The corresponding alarm
indicators will light up on the LED display.
4. When the preset alarm time is reached, the buzzer will sound.
5. To stop the alarm, press the ALARM/SLEEP OFF button. The alarm will sound again the next
day at the same time.
Wake to Radio
Turn on and adjust the volume to desired level using the VOLUME/OFF BUZZER knob and follow steps
(2) to (5) in the section “Wake to Buzzer” for alarm operation.
Snooze function
When the alarm sounds, press the SNOOZE button to stop the alarm temporarily and it will sound again
after 7 minutes. To cancel the SNOOZE function, press the ALARM/SLEEP OFF button. The alarm will
sound again the next day at the same time.
CR38 SCOTT CX82 GB IM.indd 3 7/13/2009 5:34:59 PM