User Manual

Page 9 of 12
P/N 595284-01 Rev A 9/13
Select the QUEUE Interface Manager Icon to start.
SELECT QUEUE
Interface
7. In the QUEUE Interface Manager screen, verify that the Connection Mode is
showing GREEN, indicating the USB connection with the computer.
GARVEY ART FIREMAN 3 11:55AM
MARTIN FRED FIREMAN 4 10:23AM
GUILDER JUNIOR EMT 2 10:14AM
BAILER BEN CHIEF 1 9:36AM
VHKRPT01
8. The Personnel names will automatically refresh every thirty (30) seconds, To
refresh the names immediately, select REFRESH NAMES button above the list
of names.
VHKRPT01
CHANGE THE ID OF THE QUEUE INTERFACE
The Identification Number for the QUEUE Interface Accessory is programmed
at the factory to a default identification (ID). To change the ID of a QUEUE
Interface Accessory, proceed as follows:
1. The current name of the QUEUE Interface will appear in the space below the
picture.
2. To rename the QUEUE Interface, type a
new name, (maximum eight characters
alpha/numeric) in the Field “Repeater ID.”
3. Select “Apply” to change the name. If suc-
cessful, the GREEN light on the QUEUE
Interface will flash and return to solid
GREEN.
UPDATE THE LIST OF LOGGED IN PERSONNEL
1. To clear an individual Personnel name from the list, select the name.
2. An X in a circle will appear next to the name. Select the X to permanently remove
the name from the list.
3. To clear ALL names from the list, select CLEAR NAMES from the box at the right.
This will permanently remove ALL names from the list.