User Manual

Page 12 of 12
P/N 595284-01 Rev A 9/13
SCOTT Safety
Monroe Corporate Center
PO Box 569
Monroe, NC 28111
Telephone [phone]
Fax [phone]
www.scottsafety.com
Printed in USA
REGULAR OPERATIONAL INSPECTION
Inspect and test the SCOTT CONNECT QUEUE Interface Accessory as part
of the REGULAR OPERATIONAL INSPECTION of the complete SCOTT Ac-
countability System. A SCOTT Accountability System Base Station and user
instruction SCOTT P/N 595290-01 are required for inspection. If any malfunc-
tion of the SCOTT CONNECT QUEUE Interface Accessory or the SCOTT
Accountability System is noted during the inspection, remove the defective
equipment from service and tag for repair by authorized personnel.
INSPECT THE QUEUE INTERFACE ACCESSORY
1. Visually inspect the QUEUE Interface Accessory for cracks, wear or other dam-
age. If any damage is found, remove the unit from service and tag for repair by
qualied personnel.
2. Test the operation of the QUEUE Interface Accessory as part of your routine
testing of the complete SCOTT Accountability System. Refer to the USE OF THE
QUEUE Interface ACCESSORY section of this instruction for details of operation.
If any malfunction of the equipment is noted, remove the equipment from
service and tag for repair by authorized personnel. Notify all personnel that
the unit is out of service and take alternate steps to account for the appli-
cable personnel.
CLEANING, MAINTENANCE,
AND STORAGE
Clean the exterior of the SCOTT CONNECT QUEUE Interface Accessory by
wiping with a damp sponge and thoroughly wiping dry. .
No attempt shall be made to do maintenance or to make adjustments or
repairs beyond the scope of this instruction manual without proper training.
WARNING
FOLLOW REGULAR OPERATIONAL INSPECTION
PROCEDURE EXACTLY. IF THE SCOTT CONNECT
QUEUE INTERFACE ACCESSORY DOES NOT
ACTUATE, OR IF ANY OTHER FEATURE DOES
NOT OPERATE AS DESCRIBED OR IF ANY
OTHER OPERATIONAL MALFUNCTION IS
NOTED, DO NOT USE THE UNIT.
EXPORT AND IMPORT
The international transport of the SCOTT Accountability System and portions thereof is
regulated under United States export regulations and may be regulated by the import
regulations of other countries.
If you have any questions or concerns regarding these regulations, contact SCOTT at
1-800-247-7257 (or 704-291-8300 outside the continental United States).
QUESTIONS OR CONCERNS
If you have any questions or concerns regarding use of this equipment, contact
your authorized SCOTT distributor, or contact SCOTT at 1-800-247-7257 (or
704-291-8300 outside the continental United States).