User`s manual
Table Of Contents
- Table of Contents
- Product Description: Page 2
- Cabinet Dimensions Page 3
- Location Recommendations: Page 4
- Decorating Features: Page 5
- Door Panel Attachment Page 6
- Door Swing Page 7
- Plumbing - Pump Model Page 8
- Plumbing: Gravity Drain Model Page 9
- Electrical and Start Up Page 10
- Use Page 11
- Maintenance Page 12
- How to remove scale from the ice making system. Page 13
- What to do before calling for service Page 16
What to do before calling for service
Low capacity
•
Check for restricted drain or standing water
in the bin
•
Clean the air cooled condenser fins
•
Clean the ice making system
No ice
•
Check on-off switch
•
Check electrical breaker
•
If the Check Water light is flashing Red,
check water supply. The control system
checks for water every 20 minutes. When the
water supply is restored, the machine will
automatically restart ice making.
•
If the all the lights are flashing, the auger
motor has overloaded or is not operating.
Call for service.*
Time to Clean light is on
•
Clean the ice making system.
* Technical note: One blink and repeat indicates an
overload, two blinks and repeat indicates an open
motor. Reset by pressing the on/off button.
May 2011
Page 16
SCN60
User's Manual