Service manual

Controller
September 2009
Page 15
N0422, F0522, N0622, F0822, N0922, F1222, N1322, F1522
Air, Water or Remote Service Manual
Clean
Code
Display
Component Operation Indicator Lights
Code Description
.... ....FreezeMode
flashes . . Freeze Mode is Pending
.... ....BinisFull
.... ....Clean Cycle
.... ....BoardLocked
.... ....TestMode
.... ....Off
.... ....SelfTestFailed
flashes. . No ice sensed - Retrying
..... ....Noicesensed-ShutDown
flashes . Auger motor high load - Retrying
.... ....Auger motor high load - Shut Down
.... ....Nowaterinreservoir
.... ....Refrigeration pressure too high / low
- Unit Remotely
Locked Out - Contact Leasing Company
F
F
b
C
L
d
O
E
1
1
2
2
3
4
All 4 Upper Lights Flashing
Control Operation - See Manual
Water Light On
De-Scale Light On
Test Mode
Recall Diagnostic Codes
Clear Diagnostic Codes
Reset from Code 1, 2, 3 or 4
- Restore water supply to
machine.
- Clean and sanitize
machine.
- Depress Off for 3 seconds,
then depress Clean for 3 seconds.
- Depress Off
for 3 seconds. Press Clean repeatedly to
go from most recent to oldest of 10.
- Switch unit off,
depress and hold Clean and Off for 3
seconds.
- Depress
Off then Depress On.
Technician Section
02-4407-01
On Off
Power
Status
De-scaleWater
Sanitize
Location of
Optional
Vari-Smart
Location of
Optional
Smart-Board