Specifications

DCE33 – 30 lb Gourmet Ice Machine
Scotsman Ice Systems
775 Corporate Woods Parkway
Vernon Hills, IL 60061
1-800-SCOTSMAN
Fax: 847-913-9844
E-mail: customer.service@scotsman-ice.com
www.scotsman-ice.com
© 2013 Scotsman Ice Systems. SIS-SS-DCE
4-13
Specifications
Operating Requirements
All Models
24 Hour Ice Production:
(70 deg. Air/50 deg. Water)
30 lb / 13.6 kg
(90 deg. Air / 70 Deg. Water)
16 lb / 7.2 kg
Bin Storage Capacity:
26 lb / 12 kg
Condenser Type:
Air
Basic Electrical:
(Volts/Hz/Phase)
115/60/1
Amps:
3.6
Maximum Fuze Size:
15
Refrigerant:
R-134A
Dimensions (W x D x H):
Unit (without legs adjusted):
15” x 22.8125” x 33.875”
(38.1 x 57.94 x 86.04 cm)
Shipping Carton:
18” x 28” x 38”
(45.7 x 71.1 x 96.5 cm)
Accessories
Minimum Maximum
Air Temperatures
50°F (10°C) 100°F (38°C)
Water Temperatures
40°F (4.4°C) 100°F (38°C)
Water Pressures
14 PSIG (1 bar) 70 PSIG (5 bar)
Electrical Voltage
-10% +10%
Machine requires voltage indicated on rating name plate.
Failures caused by improper voltage are not considered factory defects.
Scotsman products, except model SCCG50MA-1SS & SCCP5050MA-1SS, SCN60
are not designed for outdoor installations nor for installation where air tem-
peratures fall below 50ºF. or exceed 100ºF., nor where water temperatures fall
below 40ºF. or exceed 100ºF. Extended periods of operation at temperatures
exceeding these limitations constitute misuse under the terms of Scotsman
Manufacturers Limited Warranty, resulting in a loss of warranty coverage.
Refer to owner’s manual for all installation requirements.
Please note: when installed in a corner, the door swing may be limited due to
handle contact with the wall or cabinet face.
Finish
Cabinet / Front
Model
Drain
Type
Stainless Steel / Aluminum
Stainless Steel / Aluminum
Gravity
Pump
DCE33A-1SSD
DCE33PA-1SSD
DCE33A: Gravity  ow drain tube
DCE33PA: Built-in pump to expel drain water which includes 10’ drain tube
KHAND
KCE18-B
KCE18-SS
KD Black
KSS
SS-33
KSKPC
Custom Handle Trim Piece (Top)
18” Filler Kit - Available in Black
18” Filler Kit - Available in Stainless Steel
Handle with Black Label for DCE
Wrap Around Stainless Steel Door Sleeve Kit
Stainless Steel Front Panel Kit
Aluminum Kick Plate Cover
Shipping
Weight
lb / kg
83 / 38
83 / 38
Description
Model
Shipping
Weight
lb / kg
1 / 0.45
5 / 2.3
5 / 2.3
1 / 0.45
12 / 5.5
9/4
1/0.45
SCR
SCR
Water supply line not included.
Pump model: 3/8” drain line “included”
Gravity model: 5/8” drain line “field supplied”
SIS-SS-DCE SSD
7-13
SIS-SS-DCE33 7-3-2013.indd 2 7/3/2013 1:17:51 PM