Manual
Table Of Contents
- Table of Contents
- CABINET DIMENSIONS Page 2
- INSTALLATION Page 3
- TO INSTALL: Plumbing Page 4
- TO INSTALL: Plumbing Page 5
- TO INSTALL: Plumbing Page 6
- TO INSTALL: Plumbing Page 7
- TO INSTALL: Plumbing Page 8
- TO INSTALL: Add On Kits Page 9
- AFTER INSTALLATION - OPERATION Page 10
- AFTER INSTALLATION Page 11
- COMPONENT LOCATION Page 12
- MAINTENANCE AND CLEANING Page 13
- CLEANING Page 14
- ADJUSTMENTS Page 15
- ADJUSTMENTS Page 16
- SERVICE DIAGNOSIS Page 17
- WIRING DIAGRAM Page 18
- SCHEMATIC DIAGRAM Page 19
SER VICE DI AG NO SIS
DCE33 User's Manual
J
uly 2018
Page 17
PROBLEM POSSIBLE CAUSE PROBABLE CORRECTION
No ice falling in bin, but machine
operates
Ice may be stuck in the evaporator
and the unit is “frozen up”.
Check water supply - filter may be
restricted
Check inlet water valve - screen
may be restricted, or valve does
not operate.
Hot gas valve may not operate -
check and repair/replace.
Harvest time set too short - timer
needs adjustment.
Too much heat load. Inlet water valve leaks thru, needs
to be replaced.
No water spray Water pump does not work,
replace it.
Water leak from reservoir, locate
and repair.
Cube size control will not close See “Too much heat load” or “not
enough refrigerant”
Control defective - must be
replaced.
No airflow Fan motor not turning, needs to
be replaced.
Fan blade broken, needs to be
replaced.
Condenser completely blocked
up, needs cleaning.
Standing water in the bin Drain line restriction or drain pump
maintenance required
Remove restriction or contact
service provider to check drain
pump operation