Custom Panel Guide
Use to make a drop in door panel that covers the door and the front of its aluminum edge. Add
the KHAND to cover the top edge and a cabinet pull that matches the pulls at the installation to
better blend in with the existing cabinetry.
Cut the filler panel to the dimensions shown. Apply the
edge detail to the bottom, left and right sides.
The following directions are for a 3/4" x 15"w x 29"h
panel door blank:
1. From the back side of the door cut a 1/16"w x 11/32"
h rabbet on both sides and the bottom edge of the panel.
2. Set the saw blade to 1/4" height and cut groove in the
edge of the door 7/32 from the back of the door.
3.On the hinge side of the door cut a 45 degree chamfer
on the top with either a saw or a router.
7/32 in
1/8 in
13/32 in
3/16 in
¾
1/4 in
1/16 in
Bottom View
15.0 in
29.0 in
3/4"
Scotsman Custom Overlay Panel Spec
Custom Cabinet Door Insert for Models DCE33 or Companion Refrigerator (Black or White Only)
for Scotsman Information: www.scotsman-ice.com - 800-533-6006
KHAND
Back of door
Slot for
door
frame
Edge Detail, for bottom and sides
Top
Bottom
Panel must be
within these
dimensions
and
Must weigh no
more than 5 lb.
Front View
Side View
Hinge
Chamfer