User's Manual

Centered Ice Machine:
a. Place a filler plate on each end of the bin
b. Secure each at the back with one 5/16” bolt from the kit.
c. Drill three 1/8” dia holes thru the bin’s outside panel using the holes in the flange of
each filler plate as a template. Do NOT drill beyond the outside panel.
d. Attach the side of each filler plate to the bin with three #8 sheet metal screws from
the kit.
e. Place ice machine centered between the two filler plates.
f. Secure ice machine to the bin with the two medium length straps from the kit and the
bolts from the ice machine’s hardware bag.
g. Seal the edges of the ice machine to the filler plates with the RTV sealant.