Instructions / Assembly
Step 4: Lay Out Design 
Tape the polka dot centers (the circles 
you cut out) along the wall to lay out 
your design. This will allow you to 
easily adjust the pattern and make 
sure you like it before you set the 
template and start to paint. 
Step 5: Set the Pattern 
Place polka dot templates over polka 
dot centers, with the wax paper facing 
the wall. Peel the wax paper from 
back side of template and press 
remaining tape to the wall. Remove 
polka dot center. 
Step 6: Seal Edges 
Smooth the inner tape edges by 
pressing with a 5-in-1 tool or flexible 
putty knife. Hint: to enhance your 
paint lines, seal the inner tape edges 
with wall base paint. Allow 12-24 
hours to dry. 
Step 7: Paint the Dots 
Apply the darker accent paint to the 
polka dot templates. Let the paint dry 
for 24 hours. 
Step 8: Remove Tape 
Carefully remove tape at a 45° angle. 
If paint starts to lift, use a sharp tool 
to cut along the painted tape edge. 
Helpful Hints 
SIZE AND SCALE SUGGESTIONS 
  Consider the size of the room as you determine how big or small your polka dots will be. 
  Larger dots may make a small room look and feel even smaller. If the dots are very small, they may get lost in a 
larger room or get hidden in room full of large furniture. 
  Keep patterns to a minimum and low on the wall for a clean, uncluttered design. 
PAINT POINTERS 
  When selecting a color palette for your nursery, consider non-traditional colors such as greens and yellows. 
  Choose colors that will complement or enhance the furnishings you already have in the room. 
  Before you buy, consider bringing home paint swatches or samples, to get an idea of how the colors will look together 
in your space. It's a great way to avoid time-consuming painting mistakes. 
TAPE TIPS 
Run Tape in Circles 
An alternate way to create the dots: use a template to draw 
circles directly on the wall. Then use small pieces of tape to 
mask around each circle. 
Seal the Deal 
To sharpen your paint lines and prevent seepage, seal 
the inner tape edges with a coat of your base color. Allow 
12-24 hours to dry. 



