Instructions / Assembly
Polka Dots 
Looking for an inexpensive way to decorate 
your nursery? Try polka dots. All you need 
is ScotchBlue™ Painter's Tape, a little bit of 
paint, and a few supplies you may already 
have at home. With a few simple steps, 
you'll have a playful pattern that your kids 
will grow to love. 
TOOLS 
  ScotchBlue™ Painter's Tape 
  Paints, brush, roller & tray 
  5-in-1 tool/putty knife 
  Wax paper 
  Utility knife 
PREPARATION 
  Remove any wall hangings (pictures, nails, 
fixtures) 
  Fill nail holes, then use sandpaper to smooth 
the wall 
  Make sure wall is clean, dust-free and dry 
completely 
Step By Step Guide: 
Step 1: Mask & Paint Base 
Mask trim, baseboards and non-
textured ceilings with ScotchBlue™ 
Painter's Tape. Hint: use the chart on 
page 2 to find the right tape for your 
project. Paint the wall your lighter 
base color, and let it dry for 24 hours. 
Step 2: Draw Template 
Overlap strips of tape on a piece of 
wax paper. Seal the edges with long 
strips of tape. Then trace a circle onto 
the tape using a coffee can lid or plate 
as a guide. 
Step 3: Cut Out Circles 
Cut out the circle with a utility knife. 
You now have one polka dot template 
and one polka dot center. Repeat 
steps 2 and 3 to create enough 
templates for each polka dot in your 
wall pattern. 



