Owner's Manual
TESTING QI MODULE (MQUSM)
Testing Connection
Before proceeding
to
the preparation/installation please test the modules functionality
by
connecting the provided vehicle specific t-harness (diagram on right). Once the
module is connected, place the Qi-enabled device on the module and refer
to
the L
ED
Status chart below for specifics. For technical assistance with the installation please call
or
visit us on the
web
at:
1-800-363-4490
x1
I
www
.
scosche.com/contact
Female
connector
to
...-..
vehicle
12V
harness
connector
Note:
Th
e
mo
dule
ca
n
also
be
tested
by
connec
t
ing
it
to
a
USB
to
type-c
connection
pow
er
source
(not
included).
EE
I
~
o/,
m r----
c:C]::J
ia[J-i,:
-_,_,.,._
..
1
.....
__
_____,..
To
Qi
Module
r-.
~
Male
connector
to
back
of
12v
socket
LED Charging Status: The L
ED
indicator on the side
of
the mount
illuminates the charging status
of
the device. When powered ON, the
indicator blinks
in
the following order: BLUE, GREEN, BLUE.
Standby = Green
Charging = Blue
PREPARATIONS
(MQUSM)
4.
A.
Retrieve the shifter panel/cup-holder removed in step 2
of
disassembly.
B. Align and place the TAQ03 bezel onto the shifter panel.
C. Mark the drill location with a contrasting chalk/marker.
D.
Remove the TAQ03 bezel.
E.
Carefully make a hole
la
rge enough
to
pass the provided type-c connector though.
CAUTION!
:
DO
NOT
attempt
to
drill a hole while the
panel illustrated above is still mounted
to
the vehicle.
5