Owner's Manual
ADAPTER
ASSEMBLY
FLHX STREET GLIDE
FLHT ELECTRA GLIDE
1. Line up the foam gaskets over the fairing
side (smaller opening)
of
each adapter.
2.
Peel back the paper liner (exposing
adhesive) and attach gaskets
to
each
SAHD875B
adapter as shown.
SAHD875B
ADAPTER
3.
Using
the
hardware provided, mount each
adapter
to
the inside
of
the fairing
(3
screws
per adapter). Use
the
3 holes that line up
over the factory mounting locations. The
4th inner/bottom locations are NOT used.
4.
Mount speakers using the hardware
provided with the speakers.
FLTR ROAD GLIDE
1. Line up the foam gaskets over the fairing
side
of
each adapter.
2. Peel back the paper liner (exposing adhesive)
and attach
to
each adapter as shown.
3.
Line
up
each speaker's
SAHD875B
adapter so that
the
(2)
notches
in
the adapter rest
OVER
the existing
factory mounting posts. The adapters are designed
with notches so the factory mounting posts
DO
NOT have
to
be altered. Use the 3 holes that line
up
over the factory mounting locations. The 4th outside
screw locations are NOT used)
4. Using the hardware provided, mount each adapter
to
the inside
of
the fairing
(3
screws per adapter).
5.
Mount speakers using the hardware provided
with the speakers.
AFTERMARKET SPEAKER
& MOUNTING HARDWARE
(aftermarket speakers &
hardware not included)
4
/
/
/
/
/
GASKET
/
/
.,
., ., GASKET
TO
,
..
ADAPTER
SAHD875B
/
SAHD875B
ADAPTER &
MOUNTING HARDWARE
TOWARD
FAIRING