Owner's Manual

FACTORY SPEAKER REMOVAL
1996-UP FLTR ROAD GLIDE
0 Drape a protective cloth over the front fender.
a DO NOT remove the windshield on Road Glide models
Extract (2) T-25
Torx bolts from
bottom left and
right sides of the
fairing.
0
Use a 7/16" socket
or box wrench to
remove (2) nuts that
hold the each turn
signal at the lower
fairing.
0
Remove the metal
strap under the
nuts, and push the
studs out to remove
the signals.
CAUTION: Do not
let turn signals drop
or dangle.
0
Have a helper hold on the outer fairing and
extract the last (2) T-25 Torx bolts from the
upper fairing near the speaker grilles.
Carefully lift fairing at headlights to release
support hooks, unplug headlights and
remove. Store fairing in a safe place until
reassembly. NOTE!: Be sure to reattach
support hooks during reinstallation.
Extract Torx screws holding speaker in place, unplug wire leads
and carefully remove speaker (photo not available at this time).
3