NEXC2 User Manual Product Information Brand: SCOSCHE Product name: Dashcam Product model: NEXC2 Accessory List Main Unit USB Power Cord Car Charger Holder Pry Bar Cable Clips Structure & Button 1. Holder Slot 2. Heat Dissipation Hole 3. TF Card Slot 4. Speaker 5. MIC 6. RESET 7. Front Camera 8.
9. WIFI Indicator Light 10. Working Indicator Light 11. Power Button Power Line Wiring • Power supplied by car charger: Please refer to the red dotted line. If you use USB line to connect the device with the car charger, please choose the 2.1A output. The undercurrent could lead to malfunction. Specification of car charger: Input: 12V Output: 5V/3.
Device Instruction • Switch On/Off and Parking Monitor 1. Switch On/Off The device will switch on/off according to the start-up and stall of the vehicle. You can turn the device off by pressing the power button for more than 3 seconds. 2. Parking Monitor The device is stalled with 500mAh battery. When abnormal vibration is detected, the device will automatically wake up and record a monitoring video and then shutdown. You can use proper charger to prolong the monitor period.
(2) Green light quickly flashing(2 per second): front and rear cameras recoding (3) Green light on: TF card disconnection/ stop recording (4) Red light flashing: Firmware updating (5) Red light on: TF card malfunction/fail to record and etc. WiFi Indicator Light (1) Blue light on: connected to the App. Attention (1) The storage temperature should be between -20℃ to 70℃ (2) Improper change of battery could lead to explosion. Please use same type of battery on the device.
operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Caution: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class [B] digital apparatus complies with Canadian ICE-003. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.