Owner's Manual

CLIMATE
CONVENIENCE
CONTROL
LeftScreen
The
Scosche Touch
Screen Interface replaces the Factory climate, convenience and personalization
controls
built
into the Factory Ford Radio/Dash
panel. This
solution
provides improved ergonomics
while
adding touch
screen capabilities unique to this system. Read
the
following
sections to familiarize
yourself
with the operating
controls and settings.
FIGURE
3
LEFT
TOUCH
SCREEN
BUTTON
LAYOUT
1. Power
ON
I
OFF
2. Air Conditioning
ON
I
OFF
3. Re-circulation
ON
I
Off
4. Max
AIC ON
I OFF
5. Fan
Speed
down(-)
6. Fan
Speed
Up(+)
7. Airflow
Speed Indicator
8. Air Temp.
Cool
9. Air Temp.
Indicator Bars
1
o.
Air Temp
warm
11
.
AIC Directional Airflow
MAX*
,_
1. Press the Power Button (Fig.3, #1) to
toggle
the
climate controls On
or Off.
2. Press the Air Conditioning Button (Fig. 3, #2) to turn the Air Conditioning
On or Off. A
light
will illuminate
in
the button indicating the on/off status
of
the
A/C.
3. Press the recirculation button (Fig. 3, #3) to turn on air recirculation. A
light will illuminate
in
the button indicating the on/off status
of
the Recirculate mode. Interior air
will
be re-
circulated inside the
vehicle.
This mode helps
to
quickly cool
the air inside the
vehicle
or
prevent outside air and odors from entering. Operating recirculation mode
[while
the AIC
is off] increases humidity and may cause the windows to fog. Recirculation is not available
in the Defrost
or
Defog modes.
4.
MAX
AIC
button (Fig. 3,
#4)
on the
color
TFT touch screen to turn on Max
A/C.
Maximum
cooling will
occur with the temperature is adjusted to
lowest cold
setting and the
Fan
speed
is set
at
maximum. MAX A/C
is used to
cool
the car down as
quickly as
possible.
Touch the
Max
AIC
button again to return to the previous Fan speed and temp setting.
5.
To
decrease fan speed, press the fan speed DOWN button (Fig. 3, #5). A graphic
level
indicator
will
move down on the color
TFT screen indicating the current fan speed
(Fig. 3, #7).
6.
To
increase fan speed, press the fan speed UP button (Fig. 3, #6). A graphic
level
indicator
will
move up
on
the
color
TFT screen indicating the current fan speed
(Fig.
3,
#7). There are a
total
of
7 fan speed increments from off to maximum.
AIR
FLOW
I
VENT CONTROL
(Fig.3, #11)
Touch the vent
control mode icons (Fig.
3,
#11) on the
color
TFT touch screen to
select
vent mode.
Graphics
are
displayed according to the
selected vent and airflow pattern.
•
Air is directed
e
Air is directed
e
Air
is
~
Air
will
be
_,.
-11
to the instrument
_,.-"
to the instrument
-"
directed
e
directed to the
,-panel
vent
outlets.
\t,-
panel outlets
and
\t,-'
to the floor
""""windshield
and
the floor ventoutlets. vent
outlets floor and/or side
Q
Airwillbe
J
d1rected
to the
\t
,-
front and rear
windows
only.
£il
e
Air
will
be
directed
-.
..1
to the
Instrument
"-
~
panel
vents and
rear window
windows
only.
MAXQ
See
above (4)
for more
deta1l
on this
sett1ng
10
vent
outlets.
~Indication
light will
illuminate
on
'NV
right screen
(See Page
11).
rT.;1 Indication light will
illuminate
on
right
~screen
(See
Page
11).
ITCFD05B 05/17