Owner's Manual

INSTALLATION
GUIDE
Panel
Preparation
Step
8
Panel
Preparat
ion
Remove fifteen screws and the 12v socket
located
behind the
OEM climate control
panel
and retain for
later install;
then
remove the PCB board back cover.
NOTE:
The
amount
of
screws
may
vary
with
each
model.
Retain
the
12V
socket
from
the
OEM
panel
and
place
it
on
the
aftermarket
panel
once
removed
from
OEM
panel.
Step
9
Panel
Preparation
Remove the seven screws securing the
PCB
board to the
panel;
then remove
from the
panel.
NOTE:
The amount
of
screws may
vary with each
models.
Step
10
Panel
Preparation
Lift and remove the
plastic CD
insert
slot
away from its
location.
/
Step
11
Panel
Preparation
Lift and remove the drive train/ ignition
controls
and rubber pad from the OEM
panel
and retain for
later install.
NOTE:
Remove
rubber
and
plastics
blocking
pieces
needed
in-order
to
remove
the
ignition
controls
(See
image
on
the
right).
4
ITCFD05B
05/17