manual

Read pages 3-6
for kit assembly.
(FOUR BRACKETS) CUT OFF TABS
(4 SOPORTES) ROMPE EL LENGUENTE
TOP
TOPE
"D1" BRACKET USE HOLE #2
"D1" SOPORTE USA
ABERTURA NO. 2
"C1" BRACKET
USE HOLE #2
"C1"
SOPORTE
USA
ABERTURA
NO. 2
"C2" BRACKET
USE HOLE #5
"C2" SOPORTE
USA
ABERTURA
NO. 5
BOTTOM
FONDO
"D2" BRACKET USE HOLE #1
"D2" SOPORTE USA ABERTURA NO. 1
Read pages 3-6
for kit assembly.
RIGHT SIDE
LADO DERECHO
LEFT SIDE
LADO IZQUIERDA
"A2" BRACKET USE HOLE #3
"A2" SOPORTE USA ABERTURA NO. 3
"B2" BRACKET USE HOLE #3
"B2" SOPORTE USA ABERTURA NO. 3
"A1" BRACKET USE HOLE #3
"A1" SOPORTE USA
ABERTURA NO. 3
"C2" BRACKET USE HOLE #3
"C2" SOPORTE USA
ABERTURA
NO. 3
FRONT OF KIT
FRENTE DE
ESTUCHE
Read pages 3-6
for kit assembly.
BOTTOM
FONDO
"C2" BRACKET
USE HOLE #6
"C2" SOPORTE USA
ABERTURA NO. 6
"B2" BRACKET
USE HOLE #6
"B2" SOPORTE USA
ABERTURA NO. 6
22
1982-96 Oldsmobile Cutlass Ciera
RADIO REMOVAL:
1. Remove the ashtray from the mounting bracket.
2. Extract the two screws from the padded portion
of the dash in the ashtray location.
3. Remove the single screw from the trim ring below the steering column and remove the trim.
4. Remove the two screws from the top of the trim above the steering column and remove the trim.
5. Carefully pry out each A/C vent, one on each side of the steering column.
6. Remove the two screws from the left A/C vent location and one screw from the right A/C vent location.
7. Carefully pry out the padded
portion of the dash trim.
8. Remove the four screws from
inside the top edge of the
instrument cluster trim and
the four screws from
the bottom edge
and remove the trim.
9. Remove the four
screws from the
radio bracket/dummy panel;
pull the radio out of the cavity,
disconnect the antenna,
speaker leads and all the electrical connections. Then remove the radio.
USE THE SHADED BRACKETS & THE INDICATED HOLE LOCATIONS. CUT OFF THE REMAINING BRACKETS & DISCARD.
Usa los soportes asombrados y las localizaciónes de aberturas indicadas. Corta los soportes que sobran y desechalas.
1984-88 Oldsmobile Cutlass Supreme Classic
RADIO REMOVAL:
1. Carefully pry outward on each corner of the radio trim
panel to release the spring clips.
2. Unscrew the cigarette lighter housing and remove the panel.
3. Remove the four screws from the radio mounting bracket and pull the unit out of the cavity. Disconnect
the antenna, speaker leads and all the electrical connections, then remove the radio.
USE THE SHADED BRACKETS & THE INDICATED HOLE LOCATIONS. CUT OFF THE REMAINING BRACKETS & DISCARD.
Usa los soportes asombrados y las localizaciónes de aberturas indicadas. Corta los soportes que sobran y desechalas.
1989-94 Oldsmobile Cutlass Supreme
RADIO REMOVAL:
1. Remove the fi ve screws from
the top underside of the radio/
instrument trim panel. Carefully
release the clips from along the
bottom edge of the panel
to remove it.
2. Remove the two screws securing the radio
to the dash, and pull the radio out of the cavity.
Disconnect the wire harnesses and the
antenna lead then remove the radio.
USE THE SHADED BRACKETS & THE INDICATED HOLE LOCATIONS. CUT OFF THE REMAINING BRACKETS & DISCARD.
Usa los soportes asombrados y las localizaciónes de aberturas indicadas. Corta los soportes que sobran y desechalas.