Owner's Manual
Table Of Contents
CLIMATE
&
CONVENIENCE
CONTROLS
(cont.)
TEMPERATURE CONTROL
MANUAL
Use the UP and DOWN arrows (Page 6, Fig. 4,
#1
&
#2)
on the color TFT touch screen
to
adjust vehicle air
temperature. Touch the Red <Up> arrow
to
increase air temp. Touch the Blue <Down> arrow
to
decrease
air temp. The temperature indicator will move
up
or
down indicating the current temperature level. The
temperature range is color-coded: Red indicates warmer air and Blue indicates cooler
air.
DUAL
Touch the DUAL button (Page
6,
Fig. 5,
#6)
on the color TFT touch screen
to
enable
or
disable separate-
Driver and Passenger temperature controls. When Dual mode is Off, the Driver's side adjusts BOTH Driver
and Passenger air temperatures. A button graphic will show the ON/OFF status
of
DUAL mode.
Note:
Driver/Passenger
air
temperature
is
displayed
on
Factory
message
directly
center
above
the
color
touch-screen.
AUTO
Touch the AUTO button (Page 6, Fig. 5,
#7)
on the color TFT touch screen
to
enable
or
disable Automatic
operation. In this mode the vehicle will automatically determine fan speed, airflow distribution, A/C On
or
Off
and outside
or
recirculated air
to
maintain the desired temperature. A button graphic will show the ON/OFF
status
of
AUTO mode.
AIR FLOW I
VENT CONTROL
Touch the vent control mode (Page 6,
Fig. 4, #7 OR Fig.
5,
#12) on the color
TFT touch screen
to
toggle through
the current vent mode. Graphics are
displayed according
to
the selected
vent and airflow pattern.
AIR CONDITIONING
-...
• Air is directed
to
--.....I the instrument
~
panel vent outlets.
e Air is directed
to
the
-........,I instrument panel outlets
\l
~
and the floor vent outlets.
Air is directed
to
the
floor vent outlets.
Air will be directed to
the windshield and
floor and/or side vent
outlets.
To
turn the air conditioning ON
or
OFF press A/C button on the control panel (Page
5,
Fig.
3,
#3
).
A light will illuminate in the button indicating the on/off status
of
the Air Conditioning.
MAXQ
Touch the MAX A/C button (Page 6, Fig.
4,
#3
OR Fig.
5,
#5 ) on the color TFT touch screen
to
turn
on Max A/C. Maximum cooling will occur with the temperature is adjusted
to
lowest cold setting
and the
Fan
speed is set at maximum. MAX A/C is used
to
cool the car down as quickly as possible.
Touch the Max A/C button again
to
return
to
the previous
Fan
speed and temp setting.
666fl
HEATED SEATS
\)J)J Touch the driver's seat heater (Page
6,
Fig. 4, #4 OR Fig.
5,
#3}
button on the color TFT touch screen
to
turn on the driver's seat heater. Some options allow for
two
or
three levels
of
heat. A Button graphic will show
the ON/OFF status
or
Level
of
desired heat. Press the button again
to
cycle through settings,
or
turn
OFF.
Touch the passenger's seat heater (Page
6,
Fig. 4, #6 OR Fig.
5,
#9} button on the color TFT touch screen
to
turn on the Passenger's seat heater. Some options allow for
two
or
three levels
of
heat. A Button graphic will
show the ON/OFF status
or
Level
of
desired heat. Press the button again
to
cycle settings,
or
turn
OFF.
Q.c!/
COOLED SEATS
Touch the Driver's seat cooler (Page 6, Fig.
5,
#4} button on the Color TFT touch screen
to
turn on
the Driver's seat cooling. Some options allow
for
two
or
three levels
of
cooling. A Button graphic will show the
ON/OFF status
or
Level
of
desired cooling. Press the button again
to
cycle through settings,
or
turn
OFF.
Touch the Passenger's seat cooler (Page 6, Fig.
5,
#8} button on the Color TFT touch screen
to
turn on the
Passenger's seat heater. Some options allow for
two
or
three levels
of
cooling. A Button graphic will show the
ON/OFF status
or
Level
of
desired cooling. Press the button again
to
cycle settings,
or
turn
OFF.
7