Installation instructions

RADIO ASSEMBLY

FLATFACE DIN/DETACHABLE FACEPLATE/PULLOUT (DIN-E) RADIOS

Slide the mounting sleeve (metal shroud) into the panel’s radio opening and bend all available

mounting tabs outward (see inset). Slide the radio into the mounting sleeve once it has been fastened

to the kit panel until the radio locks into place.

NOTE: The mounting sleeve must be removed from the radio first! Your radio may be snapped into its

sleeve. Slide the mounting sleeve (metal shroud) off the radio towards the back.

2190

MOUNTING PANEL

STEREO’S REAR

SUPPORT STRAPS

NOT INCLUDED

DIN RADIO

RADIO’S SUPPLIED

TRIMPLATE

BEND TAPS

OUTWARD

RADIO MOUNTING SLEEVE

(SUPPLIED WITH RADIO)

INCLUDED WITH

MOST STEREOS

REMOVE SLEEVE FROM STEREO

1. Locate the locking mechanism on your DIN

radio sleeve (typically) on the side.

2. Slip mounting sleeve towards rear of stereo

and remove.