Installation instructions

KIT/PANEL ASSEMBLY
ATTACHING THE BRACKET(S):
Some installations require that you attach specific bracket(s). Using the supplied self tapping screws,
secure the specified bracket(s) to the bosses on the back of the mounting panel.
FORD/LINCOLN/MERCURY:
MUSTANG/
ESCORT/PICKUP
BRACKETS
CHYSLER/DODGE/PLYMOUTH:
#2190 PANEL
EXAMPLE:
TOP/BOTTOM:
Use the supplied carriage bolts and nuts to attach the factory mounting brackets directly to the kit panel
as shown.
NOTE: If your bracket has small notches on it, they will have to be flattened out or filed off in order to
mount the bracket to the top/bottom of the kit (see inset).
SIDES:
Attach the Factory Bracket Adapters FBA to left and right sides of the kit as shown. The FBA’s locator
pins should line up with the holes marked #1 on the sides of the kit panel. Be sure to insert a carriage
bolt through the FBA facing outward through the square hole (see illustration). Repeat for both sides.
Kit panel is pre-assembled. Use the
appropriate tabs that match your vehicle's
mount locations. Brackets are not required.
4