Owner's Manual
INSTALLATION
i
CONNECTING
THE
CPPDRLK-
SP
1. Connect
the
USB
Cable
from
the
CPPDRLK-SP
to
the corresponding
USB
Input
or
dongle
from
the back
of
the
stereo.
2. Connect
the"+"
Positive Male terminal from the back
of
the
CPPDRLK-SP
to
a +12V Accessory
Switched
power
source.
(Socket replacement
):
Use the existing power lead
from
the previous power socket.
(New
Installation
):
Route a new
power
wire (not included)
to
a switched
power
source such
as
the vehicle's fuse bloclc.
3.
Connect
the
..
_. Negative Male terminal from the back
of
the
CPPDRLK-SP
to
Chassis
Ground. (Socket replacement):
Use
the existing Ground wire
from
the
previous
power
socket.
(New Installation): Route a new wire (not included) directly
to
Chassis Ground.
4. Once the CPPDRLK-SP is securely mounted and connected. Re-assemble and remaining
trim
parts
to
complete
your
installation.
C
2021
SCOSCHE
INDUSTRIES,
INC 4
CPPORLK-SP
06/21