Owner's Manual

A. ATTACHING THE POCKET:

Align the pocket to the lower edge of the opening in the

panel. Then slide in, as shown, until pocket snaps into

place. The front of pocket should rest flush to the front

of panel.

POCKET ASSEMBLY

RADIO’S

SLEEVE

DIN RADIO

MOUNTING THE RADIO (2 SINGLE DIN / DBL DIN)

A. DIN-ISO / DBL DIN MOUNT:

1. Snap the L/R brackets to the 5933 Kit Panel.

2. Align, position and bolt the aftermarket two IS0-DIN or one

Double DIN head unit to the 6068 brackets. Use hardware

supplied with radio to secure the mounting brackets.

ISO DIN

RADIO

BEND TABS

OUTWARD

MOUNTING THE RADIO

B. DIN INSTALLATION:

1. For DIN mount application, slide into

radio opening.

B. ISO DIN MOUNT:

1. Snap the Left/Right brackets to the 5951

kit panel.

2. Align, position, and bolt the aftermarket

two ISO-DIN.

CAUTION:

REAR SUPPORT AVAILABLE SEPARATELY.

REAR SUPPORTING THE RADIO ADDS TO THE

INSTALLATION’S STRUCTURAL INTEGRITY.

CAUTION:

REAR SUPPORT AVAILABLE SEPARATELY.

REAR SUPPORTING THE RADIO ADDS TO THE

INSTALLATION’S STRUCTURAL INTEGRITY.