SCLEROSES DIYALM/DIVALMF DO-IT-YOURSELF CAR ALARM Thea ars two options for installing your als 1}. Simplified, no tools required installation, and 2). Permanent Installation. SIMPLIFIED INSTALLATION 1. Attach the siren mounting bracket with its magnetic RED {13Y Power} bass to the siren Lang the supplied hardware. Marks srs the wing nuts era tight. 2. Find a suitable metal surface close enough to the vehicles battery that the wins leads can reach the battery.
USING YOUR ALARM PERMANENT INSTALLATION 1. Remove the magnetic base from the Iran bracket. Find 2 results mounting ares for {fa siren. Mount the bracket using ihe supplied Saiph sing screws. Make sirs the mounting location 18 clogs sough so that the wire leads can reach ths battery. 2. Gut off he battery clips from 1h rod and black lasts, sip back % inch of the wits insulation from both wires, then prime the supplied ring terminal to the ends using a misreport ar good strong per of pliers. 2.
USING YOUR ALARM To Deactivate canto Arm and Disarm: Press and hold the MONAD button for 5 seconds until the light stops Bashing, then press the ON/OFF button again two tires, te it should flash 4 times. Your Remus 18 now Set to manual aim and disarm.
