Tribunus VII+ 200A ESC - Manual

Page 12
13.3 Tribunus ESC and VBar Control ESC setup using VBar Govenor mode
TRIBUNUS ESC AND MIKADO VBAR CONTROL/ VBAR NEO INTEGRATION
-select "Edit Heli wizard” and click through the setup to govenor page when using NEO Express
-select "Setup / Governor Mode" panel when using NEO PRO/ PRO Rescue.
You will be directly in Scorpion automatic setup panel.
-afterwards check gear ratio, motor pole and headspeed settings in ESC Setup panel
-for battery management using the “Battery Logbook App” is suggested as well as installing a Battery ID reader and the required App
-after these automatic setup, check all parameters of step 13.5 e.g. motor direction and protection settings to match your usage
-by entering the Govenor Mode panel, the automatic setup will start directly
-after automatic setup is done, choose your BEC voltage and exit this menu
-depending on changes the ESC may restart when leaving the panel