Installation manual

2. Press button
#4 to save and
exit
1. Press button
4 to scroll
he between t
sensor icons
3. Press button 1 to
toggle b
sound an
etween
d duration
4. Press button 2
to adjust
5. Press button 4 to
save and exit
2. Press button 2 to adjust.
Siren will chirp to confirm
sensitivity level 1-5
1.
Standard Features
Press button 1 to
toggle between
On/Off and
sensitivity levels
3. Press button 4
to save and exit
Tone Duration
On/Off Sensitivity Level
• 2-Way FM Transceiver
• Alphanumeric LCD display with backlight
• Ultra low power drain MCM
• Built-in Analog Devices ADXL202 accelerometer
• Ignition protection
• Range Confirmation Signal (RCS)
• Remote sensor control
• Battery safeguard with “sleep mode”
• Clock w/alarm
• Violation display with time stamp
• Passive arming
• Selectable arming / disarming
• Automatic reset
• Flashing lights with memory display
• Long range paging transmitter
• Programmable multi-tone siren
• Selectable siren duration
• Arming confirmation
• Low battery indication
• Remote panic feature
• Soft chirp arming
Optional Accessories
• Perimeter sensor – A miniature multi stage microwave sensor that detects motion
in mass around the motorcycle, and uniquely protects its parts and accessories.
Detects any attempt to tamper with saddlebags, luggage or accessories.
• Ignition disable and anti-hijack kit- Allows remote disabling of the motorcycle’s
electrical system, should someone force you off your bike. Also prevents the
engine from being started when the system is armed.
• Back-up battery Transmitter–Built in back up power capacitors with voltage
sensing circuitry will ensure operation of the paging system even if wires are cut
or battery is disconnected.
• Factory Connector Kits–OEM style connectors that simply plug into the
motorcycle’s factory wiring harness. Connector kits are available for select
motorcycle models.
1
Selecting Auto/Manual Arming
Enter the programming mode. Scroll to the icon and Press Button #1 to enter the
arming selection screen. The LCD will display the current setting ([Act] or [PAS]) and
the siren will chirp two or three times. To program follow these steps:
hen entering the arming program mode, the siren and turn signals will confirm the current mode
electi
Enter the programming mode. Scroll to the icon and Press Button #1 to select.
Adjusting th eter (Impact/Shock) Sensor
#1 to select.
o test sensitivity bump mot ode, a siren chirp will indicate an
W
• Manual arming- siren chirps 2 times, lights flash 2 times
• his mode the system will Auto arming- siren chirps 3 times, lights flash 3 times (In t
automatically arm itself 60 seconds after the ignition is turned off)
ng Siren Tone and Alarm Duration S
The screen will display all of the sensor icons. To program follow these steps:
.
e ADL202 Accelerom
Enter the programming mode. Scroll to the icon and press Button
The screen will display the current shock setting, and the siren will chirp 1-5 times to
confirm sensitivity level. To program follow these steps:
T orcycle while in sensitivity adjustment m
alarm trigger
10
1. Press button 2 to
toggle between
the alert options
2. Pr button 1 ess
to select sensor
icon
There are 5 siren tones
and 3 cycle duration
settin
g
s for ach senso
r