Service manual

14
With the provided
hook & loop fasteners,
mount the siren in any
convenient location.
Avoid areas exposed
to heat, road debris
or chemicals.
With the hook & loop fasteners, mount
this sensor on top of the battery or any
flat surface, ensuring that the top side of
the sensor is facing upwards. Mount the
perimeter sensor at least 6 inch away
from the unit.
Turn the ignition on and immediately
unplug the ride harness from the ride
module within 5 seconds. Plug back in
the Ride harness to the Ride module
with the IGNITION OFF to access remote
programming mode.
ENCODING THE REMOTE