User manual

User Manual
Front Panel Operation
Page 3-50 (Rev. 2.0 /August 2005)
NOTE
The number of Audio Channel Configurations provided in the Audio Configuration menu is dynamic and is set by
the configuration of the IRD-2900 unit.
The Audio Configuration Menu is entered from the IRD Configuration Main
Menu (see Paragraph 3.3) and is displayed in the following menu format:
Audio 1-2-5
1 Audio 1
2 Audio 2
3 Audio 3
4 Audio 4
The Audio Configuration Menu parameters are all categorized the same:
A. Audio 1
This group contains parameters that define the setup of the audio decoder
mode, AC3 downmix mode, AC3 operational, Pass-through sample rate,
volume, analog output, and analog mixing.
For details on the Audio 1 Parameter, see Paragraph 3.3.5.1.
B. Audio 2 (if applicable)
This group contains parameters that define the setup of the audio decoder
mode, AC3 downmix mode, AC3 operational, Pass-through sample rate,
volume, analog output, and analog mixing.
For details on the Audio 2 Parameter, see Paragraph 3.3.5.1.
C. Audio 3 (if applicable)
This group contains parameters that define the setup of the audio decoder
mode, AC3 downmix mode, AC3 operational, Pass-through sample rate,
volume, analog output, and analog mixing.
For details on the Audio 3 Parameter, see Paragraph 3.3.5.1.
D. Audio 4 (if applicable)
This group contains parameters that define the setup of the audio decoder
mode, AC3 downmix mode, AC3 operational, Pass-through sample rate,
volume, analog output, and analog mixing.
For details on the Audio 4 Parameter, see Paragraph 3.3.5.1.