User manual

User Manual
Front Panel Operation
Page 3-46 (Rev. 2.0 /August 2005)
• VITC (VERTICAL INTERVAL TIME CODE) PARAMETER
When the Vertical Interval Time Code (VITC) VBI parameter is
selected, the following screen is displayed:
VITC 1-2-4-2-4
1 Source DISABLE
2 Line1 12
3 Line2 14
When selecting the Source option, the following screen is displayed:
Source
1 DISABLE
2{ INTERNAL
3
{ VIDEO
The available options are:
• Disabled – VITC is disabled.
• Internal – The IRD re-inserts the IRD uptime.
• Video – The IRD re-inserts the VITC signal as included in the transport
stream.
When selecting the Line 1 option, the following screen is displayed:
Line1
12
<00 - 23>
When selecting the Line 2 option, the following screen is displayed:
Line2
14
<00 - 23>
The IRD allows inserting VITC to any line between 0 and 23.