User manual

User Manual
Front Panel Operation
Page 3-34 (Rev. 2.0 /August 2005)
The Mapping Port to Service Configuration edit menu screen allows you to
view and set up the services for the following options:
1. PCR1
2. PCR2 (if applicable)
3. Video1
4. Video2 (if applicable)
5. Audio1/Audio2
6. Audio3/Audio4 (if applicable)
7. VBI1
8. VBI2 (if applicable)
9. Subtitling1
10. Subtitling2 (if applicable)
11. Low Speed Data
12. High Speed Data
13. IP Data
Selecting a service from the Mapping Port To Service Configuration Edit Menu
screen displays the following Select Value screen. It allows you to view and set
the port for the selected service:
PCR1
1 STAND ALONE
2 {TV1
3 {TV2
A. Top Line – Displays the PID name selected for setup
B. Next Two Lines – Displays the options available for the parameter
The available options are:
• Stand Alone – This mode indicates that you can assign the elementary
stream PID. In this mode, the elementary stream is independent of the
services selected for decoder#1 and decoder#2.
• TV1 – This mode indicates that the elementary stream is related to the
service assigned to decoder#1.
• TV2 – This mode indicates that the elementary stream is related to the
service assigned to decoder#2.