User manual

IRD-2900 Series
Professional Integrated Receiver Decoders
Scopus Documents (p/n 100793) Page 3-23
3.3.2. Stream Configuration Menu
The Stream Configuration Menu contains parameters that are used for
handling the input stream.
The Stream Configuration Menu is entered from the IRD Configuration Main
Menu (see Paragraph 3.3) and is displayed in the following menu format:
Stream 1-2-2
1 Decoder Stream Source FRONT-END (QPSK)
2 ASI Input-Rate Range UPTO 72Mb/s
3 ASI Output Source AFTER DECRYPTION
4
27MHz Synchronization STREAM PCR
The following paragraphs provide information about the Stream Configuration
parameters.
• DECODER STREAM SOURCE
The IRD supports a wide range of optional input interfaces, allowing the
IRD to receive input streams from different sources.
The Decoder Stream Source parameter defines the input stream source.
When a QPSK receiver is active in the IRD, the following menu is displayed:
Decoder Stream Source
1 FRONT-END (QPSK)
2{ ASI
3{
SERIAL RS422
4{ None
When an IP receiver interface is active in the IRD, the following menu
appears:
Decoder Stream Source
1 FRONT-END (IP)
2{
ASI
3{ SERIAL RS422
4{ None
NOTE
The Decoder Stream Source screen is dynamic and it changes according to the currently active IRD interface.