User manual

User Manual
Front Panel Operation
Page 3-20 (Rev. 2.0 /August 2005)
3.3.1.2. IP Receiver Configuration Menu
NOTES
The Configuration Menu for the IP Front-End receiver is activated only when the IP Front-End receiver interface
option is installed in the IRD.
Make sure all switches and routers are IGMPv2 enabled and that all transport stream sources have unique
multicast IP address.
The IP Receiver Configuration Menu contains parameters that are used for
connecting the IRD to the IP network for connecting to a relevant TS source.
The IP Receiver Configuration Menu is entered from the IRD Configuration
Main Menu (see Paragraph 3.3) and is displayed in the following menu format:
Receiver 1-2-1
1 MPEGoIP Input 1
2 MPEGoIP Input 2
3 General
MPEG
O
IP I
NPUT
#
MPEGoIP Input 1
1-2-1-1
1 IP Address 195.025.000.035
2 Network Mask 255.255.255.000
3 Default Gateway 195.025.000.001
4 Source IP Address 224.010.010.010
5 UDP Port 02000